16th December 2018, 12:05
|
|
Senior Member
|
|
Join Date: Nov 2012
Posts: 845
|
|
I managed a quick session in the cave this morning, with one eye on the weather as I wanted to take the A352 for a spin before condemning her to another week under the soggy 'waterproof'  cover. I first unbolted the exhaust manifold, removed the old gasket, cleaned the mating surfaces and ran a die up the studs. I fitted the new gasket, replaced the exhaust manifold, and offered up the new inlet one. It fouled the exhaust flange very slightly but the merest bit of dressing with a flat file soon had it sitting nicely. As it'll doubtless have to come off at some stage, I only very gently nipped up the nuts. With the base gasket in place I fitted the DCD, again only nipping up the bolts, and made the first cut of the card template I'll be using to mark the bonnet for surgery. Shaky photo' alert, as ever.
As it was then A352 o'clock, I called it a morning.
Regards, Mick
|
Threaded Mode
