Convertible New Build
I had a chat with Dan back in the early part of the summer to see if he would be happy to do a convertible. I had plenty of time to source a good donor and do all the prep. I found a low mileage 2.8 manual locally and the deal was done. I've progressed on the interior whilst waiting for the panels, fitted replacement seats, new door cards, removed the horrid plastic boxes behind the seats and done some retrimming. I also carried out the Z4 rear hub conversion as I knew my wheel choice was going to be right on the limits. The conversion is simple enough ( with the right tools ) and reduces the track by about 20mm each side.
Managed today to trial fit the panels onto the donor. All fit well and line up without any issues.
The wire wheels fit under the arches, just ! They are deep dish 6"-15"'s that are fitted with 205/70 - 15" tyres, I think I'll be going down a size or two on the tyres as they are a bit too wide. I'll probably fit some lowering springs, maybe -30mm as the car seems just a little high at the moment. That should also have the effect of bringing the wheels in a few more mm at the tops.
I've splashed out on some Harrington stainless bumpers that will ad the finishing touch.
Undecided on final paint colour choice, at the moment I'm thinking dark metallic red or silver grey ?
More updates to follow...…….
Last edited by Lucky@LeMans; 3rd December 2019 at 23:28..