Skip to main content

MadaboutKitcars

This is a read-only archive of the old Madabout Kitcars forum. New posts and replies are no longer possible, but every thread is still here to browse and read.

Odd size Fuel Hose

chrislandy 6 Feb 2009, 4:24pm
I'm trying to find about 1ft (30cm) of 32mm INSIDE diameter fuel hose that's suitable for full time emersion in petrol, ideally the hose should NOT have wire reinforcement i.e. is semi flexible as it's a little tight where i've got to put it!

I've tried all the usual suspects eg cbs, europa etc

Any ideas?
limpabit 6 Feb 2009, 5:07pm
The Marlin guys have been down this route with the fuel filler hose. Not sure of diameter. But could not get is anywhere. Apart from the filler neck of a MK2 200 (wedge). Or was it Mk3?? I'm sure it was a mk2.

Worth a look down the breakers though.
peterux 8 Feb 2009, 9:46am
chrislandy wrote:
I'm trying to find about 1ft (30cm) of 32mm INSIDE diameter fuel hose that's suitable for full time emersion in petrol, ideally the hose should NOT have wire reinforcement i.e. is semi flexible as it's a little tight where i've got to put it!

I've tried all the usual suspects eg cbs, europa etc

Any ideas?


Here you go....
http://www.chandleryworld.co.uk/acatalog/MarineFuelHoseENISO7840A1A2.html

but it does seem to have a wire helix?

I have found Marine Chandlers a good source of unusual fixings and things...
peterux 8 Feb 2009, 10:41am
limpabit wrote:
Thats a handy site to know. Added to favorites.:)


Google is a wonderful thing!