MadaboutKitcars

Hi guys,

Just talking to a friend who does a bit of racing, he is very impressed with my 5EXi and asked what the caster, ride height, camber corner weights?

I explained that Marlin were quite happy to do this for me all I need to do is pop down to sunny Crediton.

He suggested that Marlin should supply the figures as part of the build.

Does any builder know of these settings?

Thanks Trev

Trev,

There was an email sent out to all builders a short while ago. If you didn't get it i'll forward it on to you. However, they are only start positions.
Another option might be to use the figures from an elise?

There has been an excellent write up in the last four issues of Practical Performance Car that details methods for setting up your car at home accurately. It is excellent.

HTH

John.

Cheers John

Be grateful if you could forward on the email.

Think either I did not get a copy, or lost it when I had to rebuild the computer a couple of weeks ago.

I will try to pick up the mag too!

Trev

Any chance I could get a copy of that email too.

Thanks

Mark

done Mark and Trev

John