19 Jul 2014, 8:33pm
Hi. Can anyone tell me If it is possible to use my Pilgrim Bulldog body on a MGB GT or Triumph Herald donor. Thank You.
Pilgrim Bulldog Project - HELP Please.
19 Jul 2014, 9:40pm
MGB is a monocoque so no separate chassis
Herald is 90"wheelbase...has a separate chassis so measure yours for track and wheel base and see if it is compatible.
I worried you are trying to find a chassis for your car without narrowing it down to cars with the correct wheel base
I.e. Wheel centre to wheel centre. From front to back.
Herald is 90"wheelbase...has a separate chassis so measure yours for track and wheel base and see if it is compatible.
I worried you are trying to find a chassis for your car without narrowing it down to cars with the correct wheel base
I.e. Wheel centre to wheel centre. From front to back.
20 Jul 2014, 7:40am
Thank You Red rat bike Hi. Once again thanks for your advice.I had wondered if anyone had previously had either project and to see the possibilities.Thank You.
20 Jul 2014, 11:53am
Thank You Red rat bike Hi. Once again thanks for your advice.I had wondered if anyone had previously had either project and to see the possibilities.Thank You.
google is your friendfind the wheelbase and track of your kit then go searching for cars with similar wheelbase and track and seperate chassis
mm inches
Wheelbase 2438 96
Track/tread (front) 1320 52
Track/tread (rear) 1320 52
you have to put a bit of groundwork in if you want to progress
20 Jul 2014, 3:36pm
Pilgrim Bulldog enqs.
Thank you
Thank you
7 Aug 2014, 1:44pm
i take it thats yours for sale on ebay?
7 Aug 2014, 2:14pm
Hi. Yes, the project was too much for me.Thanks for all your advice Regards