Skip to main content

MadaboutKitcars

This is a read-only archive of the old Madabout Kitcars forum. New posts and replies are no longer possible, but every thread is still here to browse and read.

Fuel pipe to tank

26 Feb 2006, 9:29pm
What is the best way to attach fuel pipe to the tank? Im using 8mm black pipe.
27 Feb 2006, 9:26pm
I've ordered some of these:





And an NPT 1/8" tap off eBay so hopefully that will do it!
8 Mar 2006, 8:14pm
What is the best stuff to seal/hold these types of connectors to the tank? (holes are tapped)
24 Mar 2006, 8:51pm
Patrick where did you get these ive been looking for them for ages as the return to my tank is very close to the diff and the fuel pipe fouls it when fitted. The right angled conector would solve the problem. I would fit these with some locktight 275 as this is liquid & gas tight so should be good for petrol. I will test some in petrol over the weekend to see if its ok.
29 Mar 2006, 1:28pm
Stuart wrote:
Patrick where did you get these ive been looking for them for ages as the return to my tank is very close to the diff and the fuel pipe fouls it when fitted. The right angled conector would solve the problem. I would fit these with some locktight 275 as this is liquid & gas tight so should be good for petrol. I will test some in petrol over the weekend to see if its ok.


My post seems to have gotten lost :) I got them either at [url]www.rallydesign.co.uk[/url] or [url]www.europaspares.com[/url]. You can also get them at KMS and http://www.raceparts-direct.com/