Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Tribute Automotive Builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=18)
-   -   Z3 side exhaust (https://madabout-kitcars.com/forum/showthread.php?t=5812)

Danny_HUFC 26th February 2016 07:26

Z3 side exhaust
 
Just seen this on ebay on the tribute listing for the kobra kits....

http://i1273.photobucket.com/albums/...sisd1fjk3.jpeg

Does anyone know anything about it and if the side exhaust is real?

I looked at ways of putting a side exhaust on mine but failed! This looks good but is it real?

Jaguartvr 26th February 2016 07:39

Looking at the bluing on the pipe I would say it's real

DaveP 26th February 2016 09:37

Isn't it one of Rob's (mobilerobbie) as that car in the front/side view has been about quite a while. (Just noticed its RHD so I am probably a long mile off that comment)

It also appears on the thread showing most known Kobras here :

http://www.madabout-kitcars.com/foru...?t=4623&page=2

But without the stripes and the side exhaust - intriguing development of it therefore.

Nice wheels (wonder what they are).

Side mirrors are interesting too - not quite bullets.

I assume the pipes are only that side as exhaust on the Z3 is usually down the one side.

mobilerobbie 26th February 2016 20:54

not my car....
 
No its not one of my cars...
I must say I only like a sidepipe when it has nice dimensions and on a Trbute Kobra it will never look good enough (for me that is)

Rob

Tribute Automotive 26th February 2016 21:11

This car is one of our unfinished projects sold to Steve in Devon:

http://www.madabout-kitcars.com/foru...ead.php?t=5045

I have spoken to Steve about the side pipes, he fabricated them himself. The Z3 exhaust is stock upto the middle of the car, they then turn at 90 degrees and join into the middle of the side pipes in the middle. The blueing at the front was achieved with a blow torch.

Danny_HUFC 27th February 2016 10:14

Ahhh so it goes through the middle of the sill? Will have to look into that.

DaveP 27th February 2016 12:35

Quote:

Originally Posted by Tribute Automotive (Post 75447)
This car is one of our unfinished projects sold to Steve in Devon:

http://www.madabout-kitcars.com/foru...ead.php?t=5045

I have spoken to Steve about the side pipes, he fabricated them himself. The Z3 exhaust is stock upto the middle of the car, they then turn at 90 degrees and join into the middle of the side pipes in the middle. The blueing at the front was achieved with a blow torch.

Thanks for the clarification Chris. Great to see someone still progressing the concept - especially from an early version.

Dave


All times are GMT +0. The time now is 15:12.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022