Madabout Kitcars Forum

Madabout Kitcars Forum (http://www.madabout-kitcars.com/forum/index.php)
-   Marlin Sportster, Cabrio, Berlinetta and Roadster builds (http://www.madabout-kitcars.com/forum/forumdisplay.php?f=13)
-   -   M52TU Engine Question (http://www.madabout-kitcars.com/forum/showthread.php?t=7270)

ChrisS 1st May 2020 12:49

M52TU Engine Question
 
In the process of finalising all the ancillary pipes around my M52TU25 engine. I have what looks like a vacuum pipe coming from what I believe is the crankcase purge valve at the front end of the engine under the inlet manifold. Canít find anything that looks like it on realoem.com but the Haynes manual shows it.
Trouble is I canít find any indication on where to connect the other end of the vacuum pipe. Just doesnít seem to be shown anywhere.
Any ideas? Is it possible to just ignore it?

peterux 1st May 2020 12:56

It could be the fuel tank vent pipe but without a picture it's difficult to say for certain. Is a small nylon pipe?

ChrisS 1st May 2020 13:09

2 Attachment(s)
The item and pipe in question

peterux 1st May 2020 18:36

I'm pretty sure that is the fuel tank breather purge valve.
I have a slightly different engine to you but I removed the valve and plugged the hose that goes to the inlet manifold.

ChrisS 1st May 2020 21:07

Thanks


All times are GMT +0. The time now is 10:10.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2014