Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Tribute Automotive Builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=18)
-   -   MX250 lights wiring (https://madabout-kitcars.com/forum/showthread.php?t=7454)

belgian2b 18th October 2021 16:26

MX250 lights wiring
 
Hello,
i am slowly finishing the car.
I connected all lights, and everything is fine, except front low beam.

I just took the original mx5 lights and connected the new lights.
Is there something i should do about the popup lights ?

I only can find one relay, and it is called "retract". How can i check it ?

thanks in advance for your help

Gerardo

Drummajor 19th October 2021 19:21

Hi, I assume you’ve used the standard type bulb with 3 connectors on the back?
You should just be able to push the MX5 connector block (you may need to extend the wires) onto the bulb. Easy .

belgian2b 22nd October 2021 15:24

Thanks for your anwser.

yes , i use a standard 3 connectors lights.
i have extended the wires.

i have taken all the pop-up assembly out .

Should i bypass the connector of the pop-up ?

Gerardo

Drummajor 22nd October 2021 19:20

Quote:

Originally Posted by belgian2b (Post 107002)
Thanks for your anwser.

yes , i use a standard 3 connectors lights.
i have extended the wires.

i have taken all the pop-up assembly out .

Should i bypass the connector of the pop-up ?

Gerardo

No need to as you don’t need it . Just leave it alone


All times are GMT +0. The time now is 01:22.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022