Madabout Kitcars Forum - 274 in restoring

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)

- Sammio Builds and discussions (https://madabout-kitcars.com/forum/forumdisplay.php?f=17)

- - 274 in restoring (https://madabout-kitcars.com/forum/showthread.php?t=5617)

Rene	25th September 2015 15:28

274 in restoring

1 Attachment(s)

Hi Champs
Frame now welded and restored with new outriders looking as should be, just perfect.

Regards

Rene

Paul L

27th September 2015 08:13

Rene - Glad to hear the chassis has been sorted out.

Is there any other work to do, or can it now be put back together?

Good luck, Paul. :)

Rene	27th September 2015 09:00

Paul, there are some other issues to do. Gear change,
Footwall driverside welding, electronical modifications distributor missing?. But after coating the chassis, will start to put together the suspension,brakepipes e.t.c...

Regards

Rene

micky1mo

27th September 2015 12:45

Hi Rene, I was just looking at the chassis of 274 before it was stripped and noticed the rear leaf spring is the original Herald one.
These are designed to carry a much heaver body so make the ride in a Sammio very hard.

You can remove a few leafs but I have a Spitfire rear spring with a lowering block fitted to my BMW powered Sammio and the ride is quite reasonable. :smile:

Rene	27th September 2015 14:28

1 Attachment(s)

Thanks for your info. I will check this. I am thinking also to modify with a stabilisator at the rear....

Regards

Rene

All times are GMT +0. The time now is 03:58.