|
Adieu.....
The Monaco will be going to France, where many of its brethren already reside. The vendor is happy with this result.
I can't say I'm enamoured with the grille......... https://live.staticflickr.com/65535/...4f2fde08_b.jpg https://live.staticflickr.com/65535/...49ea3659_b.jpg Regards, Mick |
The Mating Season
Yesterday, at long last, good weather coincided with the availability of help. A 17 point turn was once again needed to get the chassis back in front of the body. Without a steering column and wheel this is hard work for a coffin dodger!
https://live.staticflickr.com/65535/...ca80176f_b.jpg Hopefully, this is the final mating of body and chassis :). https://live.staticflickr.com/65535/...55de8a25_b.jpg I dug out the container of mounting fixings and bolted it down with a smear of copper grease on the threads. All these fixings are A2 stainless so any future dismantling should be hassle free. Today I'll build the pedal box and master cylinders back in and have a game with my pipe flaring kit. Regards, Mick |
Well done, Mick, it is indeed a great feeling when you get the body on for the final time. :eusa_clap:
|
Now what Mick? I for one will miss your reports. Don't be long.
Dave |
Quote:
https://live.staticflickr.com/65535/...6b698647_b.jpg Thanks for kind comment regarding my posts, given the many hiccups along the way so far, I'm sure there'll be a good few more to report on before the thread morphs into 'on the road'. Regards, Mick |
Never say never! I'm 75 and still feeling the madness.
|
Sure someone turned up recently somewhere with the sherpley moulds
|
At 74 I'm close behind, but, I've got enough toys to play with. A series 1 Landrover with a dodgy gearbox and a Marlin roadster needing refreshing. 'You don't stop playing with toys when you grow old, you grow old because you stopped playing with toys'! But I have noticed some things have got a lot heavier in the last 30 yrs.
|
Quote:
|
This Sherpley was unsold on eBay and the item said it came with the moulds....
https://www.ebay.co.uk/itm/Classic-c...p2047675.l2557 |
You could easily create your own Bentley lookalike. There are lots of options if you use a commercial vehicle rolling chassis. Probably not many old Sherpa's about which had the leaf spring front axle but still lots of other potential donors. You don't need much in the way of pre moulded parts, at least half the car is flat panels. The main body tub could be made from plywood and clad with leather.
|
There’s a Sherpa chassis on retrorides for sale
|
Quote:
At a mere 71 I'm somewhat humbled by the above posts from my seniors. I shall try to man up. Regards, Mick |
Quote:
Been playing with car builds since the early 1960's. Can't stop! |
Molleur, Why would you want to stop? You'd have nothing to live for, doing stupid(?) things is what makes life worthwhile. Growing old is inevitable growing up is optional.
|
Never said that I wanted to stop. Looking ahead to a possible
Morgan F2 replica from scratch. I can get a Kent engine and 4 spd gearbox locally. Build the front suspension and use a shaft driven motorcycle rear. I'll give her a go in alloy too! |
Hi Mick, There is a Kit car business for sale in St Helens only £10k.
Dave |
Quote:
Regards, Mick |
Quote:
assisted with the assembly. He also raced the second Healey 100 ever brought into the USA. |
I blame Blue Peter with John, Pete and Val ! Working with card board and sticky back plastic still comes in useful on a kit car build !
|
| All times are GMT +0. The time now is 09:47. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022