Still cannot get pics to work!!

Bugger!

Driving on the ceiling ?

loads of downforce!

I’ll sort pics out at work later for you

Cheers Mr Bike:hail:
Changed computers and having a nightmare!

cracking job that ...well done

here you go...will this end up with a metalflake paintjob?
what sort of wheels will it end up with...moon discs would look pretty cool and simple to do

http://i63.tinypic.com/1562sf8.jpg
http://i64.tinypic.com/2jc99j6.jpg
http://i67.tinypic.com/a5hi7s.jpg
http://i63.tinypic.com/2mgmt92.jpg

I used tinypic.com you don't have to join/register just upload photo and copy the img code

Cheers for fixin the pics and the encouragement.
I've got a pair of screw-on Turbine MQQN discs for the rear.
Probably going for 3inch wide space saver wheels on the front.

Oh yeah metalflake!!
I've already got some Lil Daddy Roth - Runied Retina Read flake.

Sounds good
As you can see by my avatar i’m A Roth fan

https://static.summitracing.com/glob....jpg?rep=False



https://m.youtube.com/watch?v=Mf4_HQnzEPw

Cool!

"As you can see by my avatar I'm A Roth fan"

Who isn't !!!!!

Still lovin' this build. :cool:

It is amazing how fast you have created something from scratch.

As I think you only started slapping the plaster on in May!

Good luck, Paul. :)

Still working on this madness!!

Started cleaning up the torsion arms ready for chrome.
http://www.madabout-kitcars.com/foru...5&d=1538549009

Shaped up the seat, will make a removable fiberglass shell, that will up upholstered.
http://www.madabout-kitcars.com/foru...6&d=1538549009
http://www.madabout-kitcars.com/foru...7&d=1538549009

Thinking about some cosmic air vents, have got some steel u-bends, but would love to find some Perspex tube.
http://www.madabout-kitcars.com/foru...8&d=1538549009
http://www.madabout-kitcars.com/foru...9&d=1538549009

For the Third Brake light, I have bent up some 20mm acrylic 'bubble' rod, this will shave red LED's at either end and it between the headrests.

http://www.madabout-kitcars.com/foru...7&d=1546592977
http://www.madabout-kitcars.com/foru...8&d=1546592977
http://www.madabout-kitcars.com/foru...9&d=1546592977
http://www.madabout-kitcars.com/foru...0&d=1546592977
http://www.madabout-kitcars.com/foru...1&d=1546592977

Picking up some bits from the chrome shop on Saturday.
http://www.madabout-kitcars.com/foru...1&d=1546593764

£70 each with the factory/road use lumps, bumps & scars.
£30 each with about 2 hours of my time on the grinder, wire wheel.

Also been playing with plastic bubbles for the front headlights.
Was rushing too much, as they kept on melting in the oven.
Will have a better go at the weekend.
http://www.madabout-kitcars.com/foru...1&d=1546594227
http://www.madabout-kitcars.com/foru...1&d=1546594227
http://www.madabout-kitcars.com/foru...1&d=1546594227
http://www.madabout-kitcars.com/foru...1&d=1546594227

Great progress, loving the fun design and the imagination you have to finding solutions and unique style elements.

Looking good there

Love the finished seat

Big daddy Roth would be proud

Wow Colin - 6 degrees of separation and all that!

It’s great to see someone creating Ed Roth cars using the same techniques as he did. The plaster / vermiculite/ GRP body construction etc.

I wish I had seen this thread earlier. I came back to WSM just before Christmas to visit family. I grew up in Brean (near WSM) driving Cal look beetles up and down the sea front in the 80s.

I now live in Mound Minnesota USA and one of my neighbors is a fairly well know Roth car restorer - Mark Moriarty.

He has a garage clean out every year and managed to snap some pics of some of his forever toys. A couple are the original models Revel made to promote some of their kits.

I think the good pics are on my phone... I’ll post them up tomorrow!

Thanks for posting. It’s so great to see such a great and innovative build!