Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Tribute Automotive Builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=18)
-   -   Nostromo's MRS200 (https://madabout-kitcars.com/forum/showthread.php?t=6189)

Nostromo 1st November 2018 12:02

Finally!!! Got the car out into daylight. I'm pretty pleased with it I have to say.

https://i.imgur.com/fQ9C5xvh.jpg

https://i.imgur.com/UEG4gVQh.jpg

https://i.imgur.com/2kvojkQh.jpg

Still lots of bits to do but only a couple left which really matter before I can take it for an MOT.

SwiftyDS 1st November 2018 13:26

Looks great Nick ... you don’t want to come and paint mine now do you :-)

Is that a front lip/splitter you’ve fitted - looks a different (better) profile than the standard front bumper ?

wozzy 1st November 2018 13:38

Looking really good Nick
how much more have you to do?

Nostromo 1st November 2018 14:42

Swifty, bought one of these: https://rover.ebay.com/rover/0/0/0?m...2F322314609966
Dead easy to fit although it didn't want to stick with just the gluey stuff so put a few tec screws through it for good measure.
Bring the car down, we'll have it sprayed in 3 days. There's a nice premier Inn just down the road ;)

Wozzy, loads mate! Although not too much before the MOT hopefully. Just the rear fog light, reg lights+plates and rear wheel arches I think. Headlights will need aligning too so hoping for some time on my mates alignment thingy. Bit worried about the handbrake as I know they're notoriously crap on these.

wozzy 1st November 2018 15:18

Quote:

Originally Posted by Nostromo (Post 97428)
Swifty, bought one of these: https://rover.ebay.com/rover/0/0/0?m...2F322314609966
Dead easy to fit although it didn't want to stick with just the gluey stuff so put a few tec screws through it for good measure.
Bring the car down, we'll have it sprayed in 3 days. There's a nice premier Inn just down the road ;)

Wozzy, loads mate! Although not too much before the MOT hopefully. Just the rear fog light, reg lights+plates and rear wheel arches I think. Headlights will need aligning too so hoping for some time on my mates alignment thingy. Bit worried about the handbrake as I know they're notoriously crap on these.

Not too much then, the end is in sight now.

Welshkiwi 3rd November 2018 03:52

Very nice fella, be very proud of what you have done up to now! Reminds me of old rally stages and sideways cars. Love it, this is going to well received on the road.....

molleur 3rd November 2018 10:11

Awesome!

wozzy 3rd November 2018 10:31

What paint have you used ?as it looks really well

Nostromo 3rd November 2018 13:00

Thanks for the kind words and encouragement folks!

Wozzy, Simoniz tough satin spray paint (rattle cans) and one of these https://rover.ebay.com/rover/0/0/0?m...2F302801547282 to stop my finger aching. Actually made the job much easier and the paint gave a really good finish.

wozzy 3rd November 2018 13:18

That's a handy little thing
i will have to get one ordered
cheers

DaveP 3rd November 2018 15:57

Not only looks great but similar to Ken Block’s real one which is his fave car.

Check out his Hoonigan feed on YouTube where he talks about it. If you have not seen it before that is..

Dave

Jaguartvr 3rd November 2018 16:23

The paint can triggers are very good, I always find that I get a build up of paint on the tip of my finger and then it will drip onto the surface that you have just painted. The trigger gizmo stops this from happening.

Nostromo 4th November 2018 06:45

Quote:

Originally Posted by Jaguartvr (Post 97462)
The paint can triggers are very good, I always find that I get a build up of paint on the tip of my finger and then it will drip onto the surface that you have just painted. The trigger gizmo stops this from happening.

I find that my finger aches after ten minutes of spraying, much nicer to have a trigger.

Sorted the fuel flap out yesterday and glued down the hardtop with two tubes of sikaflex :) my hands now look like I may have caught the plague. Even with gloves on, the stuff goes everywhere!!!

https://i.imgur.com/qCIafoPh.jpg

wozzy 4th November 2018 07:42

Are you putting the spot lamp pod on?

Nostromo 4th November 2018 08:06

Not yet no. I may do in the future just so I can put it on if I feel like it but I prefer the look of the car without.

DaveP 4th November 2018 11:27

Quote:

Originally Posted by Nostromo (Post 97471)
Not yet no. I may do in the future just so I can put it on if I feel like it but I prefer the look of the car without.

Agreed. It looks dope like that.

Dave

Nostromo 28th December 2018 14:25

Managed to get outside for the first time in what feels like months!! Tidied the garage, finished the mesh and fitted the reg plate.

Opinions please, chrome or black mesh? Obviously, if I go for black, there'll be no turning back.

https://i.imgur.com/ttS1BKKh.png

jones 28th December 2018 14:41

Commit to all black fella will look more factory in my opinion

molleur 28th December 2018 14:48

mesh
 
Black!

SwiftyDS 28th December 2018 15:01

Looking good Nick - think it would look best in black.


All times are GMT +0. The time now is 01:45.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022