Thank you for the words of encouragement. I'm optimistic about the future.

The windshield is actually available. Sitting down? 5000 eruos! I won't be using that. For where I am in the US I will be able to use a lower polycarbonate windscreen. Like the one in one of the new pics. If safety glass is needed I think that a Porsche 550/356 windshield could be made to work well. It is the correct width and it is available in 3 heights.

It reminds me of the Ferrari P4 too.

It may be possible to fit the body to a Fiat X19 or an early MR2. But, it is my intention to build a dedicated space frame.

Here are a couple of other pics.

http://i1143.photobucket.com/albums/...psb8029997.jpg

http://i1143.photobucket.com/albums/...ps077de280.jpg

http://i1143.photobucket.com/albums/...ps09a7eb2e.jpg

http://i1143.photobucket.com/albums/...ps6c283ee4.jpg

Nice looking car!

What a simple dash and interior, it makes me weep! Why couldn't mine have been like that!
Mine seems so complex by comparison and took me forever to make.
Keep posting the pics.

You could keep your golf clubs in the air intake...

X-1/9 would be a great donor. Cheap as anything on this side of the pond, the body panels rust badly and the mechanicals would be authentic in both layout and origin.

Keep us posted on progress. :)

Hey Mr T. I'm not sure about the cheap X-1/9's, I was quite surprised at these prices, I really would not want to pay that much for a donar, what do you think?

[IMG]http://i928.photobucket.com/albums/a...ps948e5d45.jpg[/IMG]

I test drove a metallic blue X-1/9 when I was 18, loved it, had the cash to buy it in my pocket (£3k for a 2 year old car) and then called my insurance broker. They laughed and refused to cover me. Same thing happened a few months later when I found a ten year old E-Type for £1800. B&stards.

I never did get one, or an E-Type for that matter. I'd still like an X-1/9 although the dash is a bit boxy and the bodywork is soluble. Good ones do command a premium, it is, after all, a mid-engined Italian open top Sports car.

There're usually a few 'projects' (basket cases) on ebay, typically none when I checked a minute ago.

This has possibilities though -

http://www.ebay.co.uk/itm/Fiat-X-1-9...item3ceb74ea98

abarth replica
 

May be something intresting:

http://www.abarth-gmr.be

The biggest Abarth collection in the world. He also makes replicas of classical Abarths...

A mini/riley elf/Wolsey hornet coupe gt. my first car was a mini but needed a bigger boot. Maybe swb back end with a mini front end. Morris oxford coupe front end.

Hi dsg4me. Would it be possible to see what a classic mini front end looks like blended onto a swb. Also a riley elf on a swb. I don't know how to do Photoshop

Just realised I missed the picture when I suggested you could use these guys to quickly create a mock up to take a mould off.

http://www.cncpolystyrene.co.uk/wp-c...io/photo-1.jpg

They scan a model and enlarge it before milling.*

I guess you could modify the scanned model to fit the donor before they do the milling.

*Not sure if the guy with the beard was the model they scanned for this one

I can help you with this.
It would look bloody stupid

Something like a Broadspeed GT would be a prettier car

http://s561.photobucket.com/componen...speed_GT-L.jpg

Buy a model
http://www.vectis.co.uk/AuctionImages/11/3736_l.jpg

from here
http://www.vectis.co.uk/Page/ViewLot...70&Section=280

And ask the guy mentioned above by Nick to scale up to a real one for you.

That'll leave Chris time to get on with the proper SWB.

I couldn't find an emoticon showing someone slashing their wrists

Sad when people have no imagination. Curvy front,curvy back. I was thinking of changing the proportions so that it looked like a Maserati a6g. But with a slightly more domed bonnet front and wider grill which has quite a low roof.

Using donors that we have available i would have chopped roof look and the bonnet would be longer allowing for either the mx5 mk2 or z3. Plus bigger wheels so the depth of the wings would have a lower profile. Try not to let your knickers get in a twist hey lads

Even Pinin Farina would struggle to make something good from a Morris Oxford front and an SWB rear, even if he used a domed bonnet :-)

What i had in mind made it look more like the 250 GTE as the wings don't sit so high against the bonnet. And the panel where the indicators is flatter and more vertical. Allowing for the width of the 250 to the mini still using 7 inch headlights. And a half oval grill instead of whole.

Volvo amazon with big wheels look good. Even the estates' look nice

Hi there zagmad. I don`t know if this is what you were thinking of but here is something that is classic mini front on a 250 SWB body.

http://oi62.tinypic.com/fwnbkl.jpg

It looks very strange but..........

I was thinking more of keeping the wheelbase the same and taking the front profile of the bonnet and headlight off the mini. So probably 5inches back. It wasn't the other way round as that would make it like a sporty micro machine. Front being the headlights and grill not the wings and wheel size. Thanks for the pic wish i could be that skilled. :-)

Yes, you are right. It looks like a toy Micro Machine.

Maybe something like this....

http://oi59.tinypic.com/4qh3io.jpg

Yep that's more like it. The mini front had a more vertical angle than the swb, that's what i was looking at along with a more curvy grill. Funny how things can get lost in translation . Also with a 1275 gt clubman front it would look like an early ford mustang with a curvier behind. Not saying i want one but nice to be able to see if it works

A Wolseley hornet with a Mini Clubman front has also been done.

http://oi61.tinypic.com/2laxxsj.jpg

Oh dear. Does it come with baggy clothes, big shoes and a squirty flower?

How would an swb look with California front wings and headlight area.

Hehe. I was thinking more smart car reshell. City car with character. :-)

Thing is "some say" that the best looking cars have an aggressive front end with a curvy pert rear. Bit like saying Ferrari 430 front with say the more sedate back end of the 599. But each to their own.

I think the f12 is a good example of this. Ferrari 250 gtc looks nice. V12.

I don't want to type I told you so, but....

That said, DSG4ME - you have good Photoshoping skills

You're thinking of women not cars

Physco killer looking women with cute behinds not my thing. :-) 250 Europa comes to mind has the hardtop with sloping back

Alpha, that picture of the Rover deserves a better posting, so lets have Chris build one of these!

[IMG]http://i928.photobucket.com/albums/a...ps9bf76087.jpg[/IMG]

How about a kit to convert a citroen DS to one of the Chaparral (?) DS convertibles?

But gas turbine's are so difficult to get through an MOT

Both Chaparral and Citroen DS are amongst my favourite cars but I've not heard of a Chaparral DS. Can you post a pic?

I,ve never seen a Chaparral DS but I have seen a couple of DS 911,s.

http://files.uloziste.com/e052302b89...sche%20911.jpg

That doesn't look as bad as I expected - or is it one of your photoshops :icon_razz:

No, its not a Photoshop, Its real. Just like this one.

http://o.aolcdn.com/dims-shared/dims...-911DS-000.jpg

[IMG]http://i928.photobucket.com/albums/a...ps5103d161.jpg[/IMG]

I built something like that once by welding two mini subframes together. It didn't have a body though.