2 Attachment(s)
Result
|
looking good! One bite at a time!
|
Thank you Molleur,
I stumbled across two problems where tips would be mostly appreciated. 1. How to separate a top ball joint and anti roll bar links? 2. Effective and swear proof way to press new bushes? Thank you and enjoy today's sunshine (hopefully driving) Kuba |
bite the bullet and but a ball joint separator
new bushes if you haven’t got a press then try something like this https://m.youtube.com/watch?v=lFB0r6JhJVA |
Thank you redratbike.
I now bought separator and DIY press kit. Regards Kuba |
5 Attachment(s)
Hi, Today I spent few hours in my garage.
I carried more work on front suspension as well as front bit of a chassis. I've removed anti roll bar, clips, cleaned vertical links etc. Basically lots of stripping old paint, sanding down, applying rust converter, primer and paint. Results can be seen on photos. My diy press kit arrived but run out of time to test it/press any bushes. All together satisfying day. All the best Kuba |
5 Attachment(s)
Hello,
Today I locked myself in my cave from early morning till about now (11pm) :) My front suspension is done, rebuild with all new bushes, new bolts, nuts and washers. I have also decided to add new top ball joints, tie track rod ends and anti roll bar links. Plus spax shocks and uprated springs. I managed to finished LH that I started last week and also entire RH corner. Pictures attached to illustrate progress. |
Happy New Year everyone!
Just a quick update or lack of it from me. This past year was super busy where work absorbed my entire time and energy so since my last post I have done absolutely nothing on my car. I hope that in 2022 I could put some serious hours in the garage and hopefully have her usable for summer months. Cross fingers... I wish you all prosperous year 2022 and hopefully see you soon. Best wishes Kuba |
Kuba - I know that busy at work feeling.
If I can get back on the road myself this year, I will keep my promise to pay your build a visit. Good luck, Paul. :) |
All times are GMT +0. The time now is 14:08. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022