I have made a first pass at a frame design to accommodate the Tesla subframe. Suggestions and feedback are welcome.

https://youtu.be/ukRxEITgqyo

I redesigned the frame. I received my batteries. Now I need to figure out where to put them.

https://youtu.be/tzwkKEfrHPo

Wiring continues...Never been closer

https://youtu.be/Vb-iD-tYr3U

Finishing up the Tesla wiring

https://youtu.be/n6DkKv4DMq0

Finishing up the steering column and starting to design the battery boxes.

https://youtu.be/wvJ_ACsmO-8

Lambo doors are installed (sort of)

​​​​​​​https://youtu.be/5DVIR2h8wEo

Some great progress being made on your project.

Quick question on batteries, most if not all the modern electric cars out there use lithium ion cells. Is there any reason why you couldn't use lithium polymer cells that are readily available in all shapes and sizes and build your own pack ?

Nope. You could easily use the polymer pouches. It does seem like when it comes to powering a whole car, most people opt for the more rigid modules. Not sure why.

Only a thought as they are available with very high discharge values. I've seen 100c packs out there , that would offer performance gains over Lithium Ion.

Progress continues, first power-up of the Tesla Motor Controller

https://youtu.be/lSp1Xi_aFUQ

Figuring out pedals and panels

https://youtu.be/SqZxfmT95o0

Assembling the front battery box

https://youtu.be/a3Ko-OAiFB4

Attempting to start the front battery pack wiring

https://youtu.be/Pfk7S6PQYVo

Starting on the rear frame modification

https://youtu.be/HgLIncGH4U0

The motor is 1/2 installed.

https://youtu.be/5cHTQMPp1VU

Tesla Motor is installed!!!

https://youtu.be/gAamuOXk1QA

Working on electric battery cooling

https://youtu.be/5vLKSlC1gW0

Frame is finished. Modifications are complete for the Tesla Motor.

https://youtu.be/hAjczppZ_Ms

Finishing up the brake lines

https://youtu.be/PvQjC6-Y2j4

Battery box is taking shape