5 Attachment(s)
quick update on today's work after measuring 10 times I worked out the grill was an inch to one side so that has been pulled out and glassed back in and the slots have been roughed in each side of the grill,
Attachment 6428 thought it would look good with an air scoop so a bit of card and tape latter came up with this Attachment 6430 I glassed over it then when it was dry pulled it of cut it down and glassed it back on minus the cardboard Attachment 6429 hopefully this should be the last sanding down so I will put a bit of primer on to see how it looks Attachment 6431 Managed pick up a 2.8 1997 local to me for a change well that can only mean one thing next kit ordered just don't tell the wife :lol: Attachment 6432 |
4 Attachment(s)
front end is coming together now will just needs fine filling and sanding
Attachment 6444 Attachment 6442 I wasn't going to put vents in the rear end but things change lol, I will see how it looks as things progress it can always be filled back in the beauty of fiberglass Attachment 6443 |
Looking forward to seeing the final result on this one. I think the rear grill vents will add to the final race inspired version you are building.
|
5 Attachment(s)
quick update spent most of the weekend removing the dash ready to fit the new one .there is a lot of work in making up the dash the old top under the window screen needs to cutting off the old one and be bonded onto the new one to keep the air vents. also the sides where the dash bolts onto the body also need cut off and bonded on.
this is a pic is not the best but its of the underside of the new dash with the old vent boneded on Attachment 6452 Attachment 6453 trial fitting of new dash still loads to do i've filled the middle in with a bit of spare fiberglass Attachment 6454 I have taken a mould off the top so I can pad it and cover it in leather then stick it back on when the dash is covered. not pretty but it will do the job when its cut down Attachment 6455 this stuff is my savior setts in 5 to 10m mins expands setts like rock and can be sanded back what else do you need from a glue. just run out but 12 tubes on the way. Attachment 6456 bring on the weekend |
dash vinyl wrap
3 Attachment(s)
spent 4 hours prepping the dash applied a heat proof glue then wood grain vinyl wrap stood back and looked at it bleeding horrible so off it come again.
Attachment 6460 striped it again primed and painted satin black if I change the colour again it will be while it's in the car its a pain in the arse to remove and refit Attachment 6461 think I can live with it for now still work to do as always but its back in all working Attachment 6462 not 100% what to do with the carpet its tan colour I have got some black die that's a job for next weekend thou |
All times are GMT +0. The time now is 19:05. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022