Madabout Kitcars Forum

Madabout Kitcars Forum (https://madabout-kitcars.com/forum/index.php)
-   Marlin 5exi builds (https://madabout-kitcars.com/forum/forumdisplay.php?f=11)
-   -   Exhaust Options (https://madabout-kitcars.com/forum/showthread.php?t=6863)

Noj 11th September 2018 10:01

Exhaust Options
 
I've just realised that when I originally ordered the kit from Marlin, I didn't opt to buy the exhaust (probably put off by the £470 price tag).

Reading through the forum there does sound like there has been some issues with getting the Marlin one to fit, I imagine the exhaust is custom built for the car?

I see some of you have modified/non-Marlin exhausts, so I was wondering how you went about this?

I don't want to fabricate one from scratch as I cant weld, are their other options out there that I could hack down to fit?

Cees Bakker 12th September 2018 17:07

For which engine?

Noj 12th September 2018 22:02

The 1.8t 20v BAM engine from a seat Leon Cupra r.

limpabit 13th September 2018 06:53

To be honest, £470 for an exhaust if it fits, is a good price.

I got a custom one made. But that was because I had non standard turbo ;)

I needed to trailer car there though to get it made. Though while there, got a nice manifold done at the same time ;).

Where are you located?

Noj 13th September 2018 09:19

I’m down in Wiltshire, in a small town called Westbury.

I’m thinking the best option would be to go back to Marlin and get one made, I was just hoping I suppose that there would be off the shelf options.

I do have a really nice Miltek on the car at the moment, but I can’t see it would be any use.

The £470 is without VAT but still I imagine £564 is still cheaper than getting one custom built

kon 13th September 2018 14:39

Bells in Old Town, Swindon do custom exhausts. I'm pretty sure they can price it to whatever budget you have. They made me a custom stainless system a couple of years ago, for my Astra for under £300 inc vat. Was only cat-back, but it sounds like that's all you need too.

limpabit 13th September 2018 18:34

I'd get in touch with Marlin as a first port of call. Especially if you have just bought the kit. Should be able to obtain one to fit.

Place I got mine done, is a bit too far from you in Bradford

JAC.Sports 10th October 2018 21:13

There is a company just outside Bristol - https://www.infinity-exhausts.co.uk - they reworked mine on the car for me. Bells in Swindon (where I live) weren’t interested in it as it wasn’t a
Simple job. Cost me a couple hundred from infinity.


All times are GMT +0. The time now is 03:51.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022