Wow, just wow! Looks stunning!

What was the green number 34 with the MGF wheels?

That's the SAMMIO ALPHA prototype designed to fit around a Triumph Spitfire.
Here's the same car but with wire wheels.

https://i.imgur.com/Pxnt6GGh.jpg

Here the body mould only this one is fitted to a Scimitar SS1 chassis

https://i.imgur.com/ovIV5S0h.jpg

SAMMIO ALPHA bodies are available but now there's the option of doors.

Number 34, the car in the photos, was recently exported to a French Classic car dealer. :icon_sad:

Back to the "D" type and here's the left hand side of the dash.

https://i.imgur.com/Duk3WY1h.jpg

Not as clamorous as the other side but it's functional. :thumb:

Mike - This 'Jag' in a 'Jag' build will be pretty special when finished. :cool:

Good luck, Paul. :)

The fuel tank fits nicely on the original boot floor leaving plenty of room behind the seats for luggage.

https://i.imgur.com/cdlwj5lh.jpg

The gear stick had to be extended rearward.

https://i.imgur.com/NkwhUydh.jpg

It now fits just left of the hand brake.

https://i.imgur.com/o5Hbcboh.jpg

With all the operating gear in place we did the "brum brum" test, just to see if every thing fits! :becky:

https://i.imgur.com/zG3OJXVh.jpg

https://i.imgur.com/rV9jxZ4h.jpg

That bonnet sure looks big!!!!:faint:

So far so good!

Been busy doing the wiring. :mmph:

https://i.imgur.com/KaLgtkOh.jpg

Also set and painted the floor.

https://i.imgur.com/HSENoeCh.jpg

As the pedal box is now in place I'll start the copper clutch and brake lines next.:icon_smile:

Finally completed the fitting of the driver side bulkhead including the pedals, servo and clutch cylinders.

https://i.imgur.com/XEvq4hlh.jpg

Also fitted a radiator which will need a header tank.

https://i.imgur.com/6r79P24h.jpg

Finally got to spend some time on the Jag project.

Made Mk1 manifold set-up.
It consists of a pair of Yamaha XS750 triple carbs, bridged together to make one bank of carbs which will be operated by twin throttle cables.:nerd:

https://i.imgur.com/fLewaIjl.jpg

I'm calling it Mk1 as I'm not sure if the carbs will clear the bonnet and I can't check as the car is buried in the back of the workshop until the weekend.:doh:

Very interesting. Should sound great too.

Finally got around to trial fitting the first set of carbs.

https://i.imgur.com/Fbk6pkJh.jpg

https://i.imgur.com/o5wveHfh.jpg

They look good and do clear the bonnet but I have just realized these Yamaha XS750 carbs have a manual choke which will be a real pain to convert to a cable operated affair so maybe a re-think is needed. :frusty:

Had a re-think on the bike carb set-up and think these will be better.

https://i.imgur.com/Ya3ZSQ9h.jpg

https://i.imgur.com/LBr7Idjh.jpg

There Mikuni 38mm replacemnt jets are easy to get, they use a single throttle cable, single choke cable and have a TPS in case I need to fit a mega-jolt system.

They are also half the weight of the Yamaha carbs. :smile:

Finally got time to see how the new carb set-up fits on the engine.

https://i.imgur.com/P5IjlZOh.jpg

https://i.imgur.com/i6nDXBJh.jpg

They seem to fit much nicer and look much better than the Yamaha carbs.
The air filter choice will be critical to the final appearance.
Overall I'm very pleased with the up-grade. :bounce:

Nice!

Should sound awesome too.

You could go seperate sock filters then with a metal shroud/cold air scoop covering those to keep it in keeping with the car?

This sort of thing ?

https://forums.hybridz.org/uploads/m...1405040722.jpg

Picture taken from this thread

https://forums.hybridz.org/topic/118...mikuni-whorns/

I like that idea as it will also keep the intakes in clean / dry air. :biggrin:

Possibly mr towed did the same in his Sammio?

Yes, pretty much. I needed the airbox to accommodate the methanol injection system -

http://i1301.photobucket.com/albums/...ps86f8214a.jpg

http://i1301.photobucket.com/albums/...ps138bdcdd.jpg

I ran it like that for about three years before switching to bigger carbs, removing the methanol injection and running it with mesh trumpets -

https://i1186.photobucket.com/albums...pslqc5sxpg.jpg

Looks cool.
Have you still got the methanol system and did it work? :ear:

Also do you still want a Cordite/Spitfire fiberglass bulkhead?

https://i.imgur.com/pSyAfoZh.jpg