Quote:
Originally Posted by timbo
Hi Peter
The mounting plate holes on mine were over-size but in the right place. My modification came from a mistake on my part - overtightening a bolt and shearing off the head, then I couldn't get the rest of the bolt out. Oops! I welded a new plate on the back of the existing mount and it seemed to work ok.
I used M8 bolts.
Is your mounting plate big enough to drill another hole in the right place?
Do you want me to put up a closer pic?
By the way, good luck with your wiring - I got as far as trying to turn over the starter motor yesterday without success reckon its to do with the immobiliser.
Cheers
Tim
|
OK, thanks Tim for the explanation. I'll have to speak to Mark as it looks like my mount might be wrong? The fourth hole is about half a bolt diameter out but it makes me wonder about the position of the other holes?
Not made a lot of progress on my wiring. The plan was to turn the engine over on the engine stand but there isn't enough space for the flywheel between the engine and the engine stand mounting plate. Hoping to have another go next weekend.
good luck fixing yours!
Peter