Now i have the engine running it quickly became apparent I had mounted my exhausts too close to the diff as it hit when turning, when i dropped it down the cut outs in the rear valence were going to be way too big,
therefore some Sammio remedial action required,
.
Bridged in glass and formed with u pol and resin mix i have begun forming the new cut outs and eyebrows, hope it will look the part when blended in.
.
.
.
The good news is I have started the sanding process, slow but steady progress, I am sure i could have been finished if I didnt get so hung up on details..
Pops