Hi All
Thought I best give an update on the build of the MX250, as I can see you are all getting on with your builds in the last couple of months after the winter hibernation.
I have been doing the final fitting of the bits and pieces that need to fit to the car in ready for the final coats of paint once it gets warm enough. Number plate's fitted so that I can get it registered ready for the MOT.
Have had to strip the front end of the engine down again today after discovering that the crank shaft oil seal had decided to give up and start leaking oil.So after today is to strip it all down again and prep for final coats of paint, and fit new front screen as it has cracked.