13th December 2007, 18:55
|
|
Senior Member
Enthusiast
|
|
Join Date: Nov 2005
Location: Tyne and wear
Posts: 784
|
|
Quote:
Originally Posted by eaa53
Thank you for the support one and all.
This next question will be of interest to all current and new builders.
So if you started again what would you do different, not start is not an option.
Topics of interest:-
Fit the drive shafts straight? Not at the expense of having such an angle on the engine as it will probably blow eventually!! I know I could move my engine back 2 inch without having to angle the engine but can't be arsed unless I start to lose cv's
ABS (yes/no)? Fuck no!!
Upgraded brakes at build? yup big as possible currently looking at new ap's which are relatively cheap! something for after sva
Move the engine as far to Nearside as you can on installation? Why? To offset driver? Just put your seat in the middle and lean across to stear!!
Add sound insulation as you build up not as an afterthought? Done this!
Fit a quick rack at build? not bothered
Absolutly do not do.......buy it all from marlin
Cheers
|
!!
|