Thread: Dino Coil overs
View Single Post
Old 25th February 2017, 10:14
thecarbuilder246 thecarbuilder246 is offline
Senior Member
Join Date: Jun 2009
Location: leicestershire
Posts: 325
thecarbuilder246 is on a distinguished road
Default coilovers

Hi Neil

There was a lot of debate about the spring rates on the deon/jhc in the Italian Replica Car Club's magazine. Deon/jhc specified a spring rate of 300lbs for the rear and 450lbs for the fronts. Not sure without digging out the mags but I remember owners found 450lbs for the fronts were too stiff,as the cars were light at the front and resulted in brake lock ups. I have a spare set of front springs so I'll dig them out and measure them.


Last edited by thecarbuilder246; 25th February 2017 at 13:03.. Reason: wrong spring rates
Reply With Quote