Here are a few photo's of recent progress ;
* Side vents in aluminium. You can't really see the curved nature of these in the photo but they have worked out quite well.
* The engine again with the tiny alternator fitted, the only space available !
* The spacer adaptor I carved out of a big lump of alloy by hand. This was to give clearance for the thermostat housing otherwise it was clashing with the chassis . ( Sorry the photo won't load at the mo )
* The fuel filler mounted under the tear drop fairing behind the driver. A simple bracket and some flexi fuel hose going to the tank.
I've ticked off my list now so the engine can go back in and be connected up. Simply add petrol and it will start first time !
Last edited by Lucky@LeMans; 19th December 2018 at 19:31..
|