I've done a bit more with the air vents today.
The n/s is polished up a bit and stuck in the old dash for now.
The o/s was too small to fit an eyeball vent as I wanted to keep the original open/closed slider and switch. I've fitted a piece of mesh the same as I'm using in the centre console which will still work as a vent on the slider. The switch is to add a bit of of interest to it and will operate an air horn when I get around to fitting it.
I'm currently waiting for the sealer to dry on the centre vents then I can make the surrounds.
Just small things but they all move the project forwards.
Cheers, Bob.