hi luked 2189 re your mrs200 head lights i mounted mine by f/glsssing 4 long 8mm bolts with the heads cut off and a shaped steel plate welded to the end glassed over in the correct position to line up with the 4 holes in the mk 2 golf headlight brackets held in place with 2 lock nuts on each stud this allows for later adjustment also thy lift with bonnet as per original works fine then lenghhen wires to suit i lined beams up roughly at home against garage door took it for mot (known my mot man for years ) told him they might need adjusting when he checked them only o/s needed to come up about 3 turns on adjusters < result > muth easier than fitting them to the car and trying to line them up with the holes in my opinion, have fun, mick .
|