Managed to get 4 hours in on the doors today ...I have decided to slim the framework down a bit on this one ...the doors are having their return edges cut right back too ...the internal frame and inner body is all being finished in black , so frames that can be bonded on , instead of bolt on fixing when they were highlighted in silver , is possible this time .
The skinnier outer skin should look more like an aluminium body too ...at a glance !
So a couple of hours gave me this ....
Using my scrap doors as patterns I was able to make the frames nice and snug and they are part welded but need finishing and tidying up , but I wanted to make sure they worked before I got carried away ...I need to add a latch mounting plate as well ...
The bolts holding them on will be replaced with welded on captive nuts and the hinges will affix to these using 8mm socket buttons...so doors can be removed with or without hinges attached ...( Grahams are welded on 0 so only come off at pivot point )