[colinham]

I think when it comes to fitting a turbo I will go for the basic kit which is pictured in a previous post that is around £1100. Then try and find the other parts second hand of Ebay. The hardware should be easy to bolt on the only problem I can see is you have to fit a sandwich plate to the oil filter for the turbo intake oil line and also drain the sump remove it and fit a turbo return oil feed elbow this will complete the turbo installation . The cold water feed to the turbo should be more easy as you can break into the water lines. I think the ECU management system will be the most costly part to obtain. The two most recommended for the turbo install are the Apexi FC Commander or the Master Black ECU both cost around £1100-£1250 .