Managed to get all the framing done now and have started with some of the panels. I Have decided to bond the panels on and joggle the joints and will put in some small counter sunk pop rivets in as required, to hold the joints. The panels are in 1mm mild steel I have sanded the backs and cleaned with acetone then bonded with ever build sticks all extreme. So hope this will do the trick.
IMG_20180810_140521687 (1).jpg
IMG_20180810_140600756 (1).jpg
IMG_20180810_140839947 (1).jpg
IMG_20180827_145250268 (1).jpg
IMG_20180827_145229240 (1).jpg