with the cold weather it's an ideal time to work inside rebuilding the carbs on the kitchen table. All going fairly well ..... but a bit of advice from any of you guys/gals who have done the same. The kit came with replacement butterfly valve and spindles and ...er... bushes to mount the spindle. Do the old ones press/push out, or do I have to drill them out and press in the new ones?
Here's some pictures.
http://s1287.photobucket.com/user/sl...5009f.jpg.html
http://s1287.photobucket.com/user/sl...87971.jpg.html
The bush must go in the hole indicated but the old one doesn't seem to press out. Any ideas.
Slarti