As part of my 'space planning' exercise to make sure everything fits, I've been on a bit of a buying spree....
I bought my Fuel Pumps from Rally Design at the Stoneleigh kitcar show where they had some good deals on their own 'white labeled' pumps. These worked out at about 50% of the price of branded parts. I've opted for a standard Fuel filter because it is designed for the BMW engine, cost effective and easily replaced, if necessary.
Fuel pumps and filter by
marlinpeter, on Flickr
The cradles are from ebay at only £9.99 delivered! Excellent value for money and fitted perfectly.
High Pressure fuel pump by
marlinpeter, on Flickr
Next up is an enclosed Air Filter from Compbrake Motorsport....
Air Filter with cold air input by
marlinpeter, on Flickr
...another bargain for £36!
It's an enclosed cone filter with a cold air input pipe.
Air Filter internal cone filter. by
marlinpeter, on Flickr
For over a year I've had my Dual Circuit brake servo for which I'm now making some mounting brackets...
Remote dual circuit brake servo by
marlinpeter, on Flickr
I also picked up a really good tool for setting M8 rivnuts...
M8 Rivnut / Nutsert tool by
marlinpeter, on Flickr
....and it works great.
Finally for now, I bought a couple of heater hose elbows. I had to re-position the heater box further back....
Heater hose elbows fitted. by
marlinpeter, on Flickr
This will allow me to move the engine back by 10mm to allow for better sump clearance.
More bits arriving next week....
...peter