Hi Kai;
In my case, I had to change the existing suspension so i took the chance to design new wishbones for the rear and changed the uprights as well. They will be stronger for the V6 engine.
However in your case, if you want to retain wishbones, changing your upright will cause a change of position (angle) of the wishbones introducing a change of geometry in your suspension, so i think the best thing to do is what you are doing at the moment.
Good luck in finding the fiat 2300 hubs. I have a different solution for the front but it requires using different uprights and modifying the upper wishbone mounting brackets on the chassis to change the geometry as well, and i guess that´s more complicated...
cheers.
Dino_GT
|