View Single Post
  #20  
Old 18th February 2019, 12:14
lancelot link's Avatar
lancelot link lancelot link is offline
Senior Member
 
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
lancelot link is on a distinguished road
Default

SOME MORE PROGRESS ... Bonnet framework is done , radiator mounts and extended hoses ..everything is bolted to existing holes in the chassis so it can all be removed easily to get Engine etc in and out ...I welded 8mm nuts into the inner arch tubes to allow bonnet frame to come off easily and lower mounts are utilizing the bottom anti-roll bar mounts ...keeping it all simple .... I welded a bracket on Graham's car that stopped the radiator coming out , so try to think about dis-assembly as well as assembly whilst putting these together nowadays !!



Bonnet fitted , face cut out and some inner wing/brace bits glassed into the nose to stop flexing ... I'm going to make a jig today to enable me to radius the 4 arches for clearance on the 16'' wires today ...


Last edited by lancelot link; 18th February 2019 at 12:18.. Reason: added some more rambling ...
Reply With Quote