The original Z3 hinged flap unbolts from a bracket in the Z3 wing. I marked out and cut the circle from the GRP body in the same relative position as on the Z3 wing.
The Grp disc was then bonded onto the Z3 flap. A simple bracket was made to hold the hinged flap which was first carefully aligned, then bonded onto the inner body with PU adhesive.
Once that was set I checked it opened, closed and still aligned, I glassed over the bracket.
No other mods were done, the opened flap is right in front of the filler cap.
Last edited by Lucky@LeMans; 2nd December 2019 at 15:27..
|