View Single Post
  #57  
Old 6th July 2018, 21:14
Yorkshireman Yorkshireman is offline
Member
 
Join Date: Nov 2017
Location: Pudsey Leeds West Yorkshire
Posts: 86
Yorkshireman is on a distinguished road
Default

So the next was task on the car was going to be fitting the bonnet. While I was admiring the doors on the car my fiance came to the garage to see what I was up to and what progress I had made. Asking me why I had pumped the tire up more on the drivers side than the passenger?

My reply was I hadn't. Ok she said its just that the back of the car looks higher on the drivers side not to worry I will get you a beer.







The above photos show the tire was not over inflated and that the boot opening was not square to the yellow mould grease it measured 11mm higher at the drivers side. Which was sort of a relief as after much measuring of wheel centers and various body to floor measurements confirmed I hadn't put the body on at an angle.

So with that information I pushed the car in the garage and sought another beer and contacted my extra pair of hands aka Les my brother in law for lessons in fiberglass for beginners
Reply With Quote