Bonnet continued
Right worse nightmare ever but needs to be tackled, the plug didn’t release from the mould, well after a rant and a day off I took in the job of trying to recover the mould with limited damage, I ripped off the supports and then scored the surface of the plug, then put some water in and hoped it would soak in and give me a chance..
After an hour and a lot of scraping out the MDF I thought this is not working too well…
After another 2 hours I decided to try something else, scrape it out dry…
2 hours later that got most of it out…
Now for the steamer…..
Another hour or so…..
And another…
Most of it out and now to think about the paint, into work tomorrow to ask my welder for the details of the paint stripping spray he has recently has had good results from…… No more messing with nitromors…