Quote:
Originally Posted by peterux
|
I while back I fitted these Volvo engine mounts.....
I've now replaced the temporary square washers with bespoke spacers discs that help to spread the load correctly. (they will be painted before final engine fitting)
Nearside engine mount by
marlinpeter, on Flickr
Offside engine mount by
marlinpeter, on Flickr
I've also slotted the engine mount chassis holes by about 10mm which means the mounts now sit better on the chassis mounts and has also solved the sump to chassis clearance issue.
I'm now happy (subject to another body tub check) that the engine and gearbox are in their final position.
....peter