I have also prepared the back plate for the pedals. This will be welded below the pedal plate as the bottom part of the bulkhead will be a bit further away than the original, as the square tubing is surrounding the plate. I will attach the back of the pedals to the bulkhead too using some tube spacers.
IMG_1734.jpg
IMG_1737.jpg
My lowered battery tray has cured now and I have peeled it of the mold. This is now ready to be inserted into the top part of the bulkhead and glassed in when I am ready to do final bonding of the fiberglass bulkhead to the steel frame.
IMG_1725.jpg
So much for now.
Cheers,D.