View Single Post
  #125  
Old 16th June 2020, 13:30
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,375
molleur is on a distinguished road
Default

Ideally, PVA should be applied by spraying at least three "fog" (very thin) coats allowing it to fully dry between each. This will go over mould release wax, 5 layers on a new buck or mould. allowed to dry at least 15 minuted between coats and buffed. Never had an issue using this method for 25 years.
Reply With Quote