April Showers...
Whilst I could only grab a few minutes this morning before the rain returned, I made the most of them.
I got fibre glass filler on both sides of the bulkhead crush tube welding.
And just like
Scottie the other day, I made use of the left over filler while I was at it.
I covered the "inside" face of the three surplus bulkhead cable/wiring holes I'd previously welded on the engine bay side.
( These had also been treated with Kurust when I was using that the other day too. )
I used a small bit of metal to cover the extra hole I drilled for the battery cut off switch cable.
Then smothered that in the last bit of filler.
I then re-arranged the bulkhead to ensure the cover wouldn't touch the filler.
( You can just about make out the dust sheet "ball" resting on the bulkhead at the nearest end. )
The rain came within minutes of that last photo.
Have I ever mentioned that trying to build a car without a garage is a dumb idea?
Anyway, given I wasn't expecting to get anything at all done today, I've got to be happy with that.
Until next time, take care, Paul.
