Quote:
Originally Posted by rossnzwpi
Hi Neil, your pictures of a Classic Replicas suspension do look a bit different to the Deon. The obvious thing is that it is five bolt. Would I be right in guessing that the hubs are Alfa Romeo 164? The upright/knuckle at the rear may be 164 too. The wishbones look very similar to a Deon - which was originally a Lancia Beta front upright used at the rear of the Deon and a FIAT 124 front upright used at the front of the Deon. But your front Classic Replicas upright will therefore have had a 164 rear hub adapted to it (or maybe an Alfa 75 V6 front hub - 98mm PCD hub or FIAT 2300 or Dino 108mmPCD???).
|
Hi Ross
An article on the Classic replicas Dino in the Complete Kit Cars magazine of March 2008 states that the front and rear hub carriers/stub axles are from the MGF, modified to the Alfa 5 stud PCD of 5x98mm.
This is the only information I have but I know a someone who is building a De Havilland Dino which uses the MGF as a donor so I'll see if I can compare pictures with his to confirm.
Neil