Now that the spoke wheels are fitted i decide to start to try and ballance the body. I decided to start with the offside rear wing, the pictures tell the full story as to how far the body is out.
IMG_4602.jpg
You can also see the rear valance dips on the nearside which will require some work.
IMG_4604.jpg IMG_4605.jpg
I took various measurements across the back of the body and finally came to the conclusion of how much and where to make the cut.
Another area i think will require work is the nearside rear arch, the first image shows the leading edge standing slightly prouder than the offside so i may have to cut this area to move the arch in slightly.
IMG_4606.jpg IMG_4607.jpg
These images show the amount i have had to move the wing out over, it certainly looks like more than the other guys have moved their body out over but this was the only way i could get the end result that was symmetrical and balanced.
Well that's it for now, hopefully i will have the rear arch filled tomorrow and may be a bit more body work completed.