Jag - Did you want me to direct some industrial language towards you?
Dave - Cheers.
Don't get me wrong, I'd prefer the look of normal bonnet pins, but time is really against me.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sunday Sunshine - Part 1:
I was out in the Summerhouse by 8am, so I wouldn't disturb anyone while doing car work.
First job was to note which way the boot lid locks were facing before stripping the boot lid and bagging the parts.
Then I sanded down and cleaned up the inside surface, as this will be my test piece for painting.
Then brushed on some etch primer.
By now it was safe to start working out the front and it was deja-vu time as I sanding this corner down again.
I also sanded down the part of the rear wheel arch on the passenger side.
Put some filler on the driver's side.
And etch primed the passenger side.
First coat of high build primer on the boot lid.
( Not easy to see in the photo, but this is a very light brown(ish) colour. )
The filler was sanded down.
End of Part 1...