Quote:
Originally Posted by bigrich
Mmmmm....looking at your pics the assembly looks correct.
From memory mine were very close when on stands but once on the deck the clearance increased and is OK.
Rich
|
I think unless the wishbones were massively incorrect, they'd only fit one way around.
To put the situation with my car in perspective, when on the deck, i have to rotate the springs so that the arm can slot between the coils. Admitedly the front of my car is still pretty light, but to get around this I set the ride height at a "reasonable" level, and still the spring were too close........ especially when one accounts for the fact the arms move either side (up and down) of the static position.
I'm watching what happens with Steve's situation before doing anything about mine.