Well, I have achieved today, not a lot but progress none the less. I am "working from home" prior to departing for Canada for a month so into the garage! I have finished the cover plate for the access hole I cut it is attached with 4mm rivnuts with some neoprene strip to cushion it. Needs painting etc but I think it looks fine. I have cut an identical cover for the other side which has not had the hole cut out yet.
cover plate finished by
oldpropuk, on Flickr
I also managed to finish the brake master cylinder/servo assembly and fitting. I used M* machine screws to attache the MC in the end, the countersink for an M10 head is huge. This is a 20mm diameter Cortina MC so it will be interesting to see how it works when I get it plumbed!
Cortina MC fitted by
oldpropuk, on Flickr
brake MC fitted by
oldpropuk, on Flickr
Sorry about the poor quality, Iphone camera is good but only in good light! - John