Hi there;
I also have a set of GH bumpers and have come across the same thing! Actually, we thought the same about using a still angle bolted to the chassis. In the original car, however, the tubes supporting the rear bumpers are not fitted directly to the rear frame either, although there´s a still frame surrounding the whole rear panel, so it´s quite strong...
Regarding the front belly panel, I also thought the same thing as well!
It´s a good idea but remember cascu´s is a replica of the late E series dino, with the air intakes, etc, and a Deon is based on a 206 which has a very different panel, which matches with the first Dino series (L-series).
Personally I don´t think it´s a good mixture.
Cheers
Dino-GT
|