Nope, just propped/lodged it on to see what it would look like, as really want to take time getting handle mechanism to work, so research well underway on how I will do it. Nervous about cutting door skin open, so slowly/gently does it. Gotta admit I would like it/them on, but edges need a finish at they will be shown and they are not the best, also need to work out how to seal top edge as there is a bit of a gap to resolve. Don't even get me started on the alignment as still not happy with front section position, there is limited adjustment. So really all panels are first fit only and everything will come off again, hence the spade terminal connectors on all electrics.
|