Thread: MX250C build
View Single Post
  #1  
Old 29th May 2018, 12:46
terryg terryg is offline
Junior Member
 
Join Date: Feb 2017
Posts: 13
terryg is on a distinguished road
Default MX250C build

Hi all, I need some help with the build I have just started (had the kit and car in the garage for a year and just getting around to starting after moving home) This is my first time building a kit so just a little nervous about what I should and shouldn't do!

I've stripped the front end, attached the fibreglass wing supports, etc. but I have a couple of issues. For the life of me I cannot get the front end to marry up with the two under wing bolts near the drivers door (other side seems fine). There is a bolt on a mount half way between the top and bottom of the inner wing (near the door) should I be using this or just get rid of it?

Second issue, bought the mini head light kits as suggested in the parts guide but the bowls behind the lights are too big and hit the corners of the car frame. Do I cut these parts of the frame out, bash them in with a hammer or cut the backs of the bowls off?

Finally does anyone who has built a 250C have any build tips they could send me to make my life easier!

Any help or suggestions would be greatly appreciated. Thanks Terry
Reply With Quote
Available from eBay