Hello;
Cromodoras center bore is 58.1 mm, exactly as the 166 hubs, so will fit directly.
I´m doing exactly the same modification as you, and putting 16" cromodoras as well, but I use alfa uprights in the rear, and, in my case, i´ve found a bearing to avoid machining the hubs.
Your solution for the rear is right, as a friend of mine did the same to a stratos with lancia beta hubs, with a little machining.
For the front O.K., but dino uprights/hubs are a bit hard to find...The Hawk (statos kit for the fiat uprights) is 98 pcd so it´s not useful. Hawk wheels are 98 pcd.
All v6 alfa engines have 26 splines driveshafts so will fit directly to 166 hubs.
kind regards
Dino_gt
|